Trimming; Cleaning - Philips Norelco S1570 User Manual

ENGLISH
14
Stretch your skin with your free hand so
2
blades can lift and cut whiskers. Gently
press shaver to skin so the floating heads
can follow the contours of your face.
DO NOT press too hard. Too much
pressure can pinch the skin into the combs.
Turn shaver OFF by pressing the on/off
3
button once.
Clean the shaver after each use (see
4
chapter 'Cleaning').
C
5 Put the Protective Cap on the shaver to
protect shaver heads.

Trimming

To groom sideburns and moustache:
1 Turn shaver ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the shaver is
running.
3 Hold trimmer and make downward
strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn shaver OFF.

Cleaning

◗ Always clean your shaver after each use.
◗ Always switch shaver OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch shaver heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use shaver if combs are damaged or
broken. Facial injury may occur.
◗ Do not use compressed air, abrasives,
scourers or aggressive liquids such as gasoline
or acetone to clean the shaver.
Cleaning the Shaving Unit
The shaver heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse shaver in water.
ENGLISH
15