Replacing The Shaver Heads; Storage - Philips Norelco S1570 User Manual

ENGLISH
20
C
4 Lubricate the trimmer teeth with one
drop of mineral oil every 6 months.

Replacing the Shaver Heads

◗ Replace the shaver heads once a year for
optimal shaving results.
◗ Replace damaged or worn shaver heads with
model SH30 Philips Norelco shaver heads
only.
1 Turn shaver OFF, remove the plug from the
outlet and power cord from the shaver.
C
2 Press the Shaver Head Release Button to
open the shaving unit.
C
3 Pull the shaving unit off the shaver.
C
4 Turn the lock counterclockwise to unlock
B
(A) and remove the retaining frame (B).
A
C
5 Remove the shaver heads and place the
new shaver heads in the shaving unit.
Make sure the notches on both sides of the
shaving head fits exactly onto the projections in
the shaving head holder.
6 Replace the retaining frame (A) and turn
the lock clockwise until it locks into place
(B).
C
7 Insert the notch of the shaving unit into
the slot in the top of the shaver and then
close the shaving unit.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
This shaver has no other user-serviceable parts.
For assistance call 1-800-243-3050.

Storage

◗ The shaver can be placed in the travel pouch
for safe storage (S1570).
◗ Be sure shaver is turned off. Remove cord
from outlet and shaver before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
◗ Do not wrap power cord around shaver when
storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
ENGLISH
21