NEC Quadro K4200 User Manual page 69

(6) Connect the proper connector from power supply unit to the PCI-Express external power
connector (6-pin) on Quadro K4200 card. If the proper connector is not provided with the
power supply unit of the workstation, connect the 6-pin side of PCI-Express external power
cable, and connect a power connector of workstation to 4-pin connector.
Connect to PCI-Express external
power connector on Quadro K4200
If the power connector is not reach,and if the number of power cables provided with workstation
is insufficient, use the power branch cable.
※If the cable length is too long, bundle it so that the connector does not contact with metal
part, or the cable is not caught by fan or metal plate.
PCI-Express external power cable
Power branch cable
２４
Connect with power connector of
workstation
Connect the male connector to
power connector on workstation.
The female connector can be used
similarly as an ordinary power
connector.