Advertisement
DSL
Specifies whether the Gateway is reached using a fixed IP address or through a
PPP virtual circuit.
BOTH
Specifies the IP address of the default IP Gateway.
Use the following command to configure settings for routing between WAN con-
nections.
BOTH
Enables or disables routing between WAN connections.
Use the following commands to configure settings for routing IP over a virtual PPP
interface.
BOTH
Enables or disables IP routing through the virtual PPP interface. By default, IP rout-
ing is turned off. You must enable IP routing before you can enter other IP routing
settings for the virtual PPP interface. If you turn off IP routing and save the new
configuration, the Cayman Gateway clears IP routing settings
.
BOTH
Assigns an IP address to the virtual PPP interface. If you specify an IP address other
than 0.0.0.0, your Cayman Gateway will not negotiate its IP address with the
remote peer. If the remote peer does not accept the IP address specified in the
ip_address argument as valid, the link will not come up.
Advertisement
