Advertisement
DSL
Resets the point-to-point connection over the specified virtual circuit. This com-
mand only applies to virtual circuits that use PPP framing.
BOTH
Clears the security monitoring log to make room to capture new entries.
BOTH
This function disconnects the specified WAN User to allow for other users to
access the WAN. This function is only available if the number of WAN Users is
restricted and NAT is on. Use the
logon as Admin you can disconnect any or all users. If you logon as User, you can
only disconnect yourself.
BOTH
Restarts your Cayman Gateway. If you include the optional seconds argument,
your Cayman Gateway will restart when the specified number of seconds have
elapsed. You must enter the complete restart command to initiate a restart.
DSL
Displays ATM statistics for 3220-H unit. The optional
more detailed set of ATM statistics.
BOTH
Displays bridge interfaces maintained by the Cayman Gateway.
BOTH
Displays the bridging table maintained by the Cayman Gateway.
BOTH
Displays the most recent crash information, if any, for your Cayman Gateway.
BOTH
Displays the DHCP relay-agent leases being administered by your Cayman Gate-
way.
BOTH
Displays the DHCP address information being used by your Cayman Gateway for
each WAN interface.
BOTH
Displays the DHCP leases stored in RAM by your Cayman Gateway. You can
include the used argument to see the list of DHCP leases that are in use or that
have been used since your Cayman Gateway was restarted. You can include the
free argument to see the list of DHCP leases that are available for use.
parameter to disconnect all users. If you
all
argument displays a
Advertisement
