to another by entering a partial path that identifies how far back to climb.
any subnode to any other subnode by entering a partial path that starts with a
top-level CONFIG command.
use the Up and Down arrow keys to scroll backward and forward through
recent commands you have entered. When the command you want appears,
press Enter to execute it.
CONFIG commands consist of keywords and arguments. Keywords in a CONFIG
command specify the action you want to take or the entity on which you want to
act. Arguments in a CONFIG command specify the values appropriate to your
site. For example, the CONFIG command
BOTH
consists of three keywords (ip
(ip_address). When you use the command to configure your Gateway, you
would replace the argument with a value appropriate to your site.
For example:
BOTH
The following table provides guidelines for entering and formatting CONFIG
commands.
— You can move from one subnode
,
ethernet, and address) and one argument
— You can move from
— You can