RIDGID MS1250 Owner's Manual page 36

© 1999, 2000 Emerson Electric Co.
Part No. SP6287
What is covered
RIDGID® tools are warranted to be free of defects in workman-
ship and material.
How long coverage lasts
This warranty lasts for the lifetime of the RIDGID® tool. Warranty
coverage ends when the product becomes unusable for reasons
other than defects in workmanship or material.
How can you get service
To obtain the benefit of this warranty, deliver via prepaid transpor-
tation the complete product to RIDGE TOOL COMPANY, Elyria,
Ohio, or any authorized RIDGID® INDEPENDENT SERVICE
CENTER. Pipe wrenches and other hand tools should be
returned to the place of purchase.
What we will do to correct problems
Warranted products will be repaired or replaced, at RIDGE
TOOL'S option, and returned at no charge; or, if after three
attempts to repair or replace during the warranty period the prod-
uct is still defective, you can elect to receive a full refund of your
purchase price.
What is not covered
Failures due to misuse, abuse or normal wear and tear are not
covered by this warranty. RIDGE TOOL shall not be responsible
for any incidental or consequential damages.
How local law relates to the warranty
Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific rights, and
you may also have other rights, which vary, from state to state,
province to province, or country to country.
No other express warranty applies
This FULL LIFETIME WARRANTY is the sole and exclusive war-
ranty for RIDGID® products. No employee, agent, dealer, or other
person is authorized to alter this warranty or make any other war-
ranty on behalf of the RIDGE TOOL COMPANY.
Stock No. MS1250
Model No. MS12501
The model and serial number of your 12 Inch Compound
Miter Saw may be found on a plate attached to your saw
at the rear of the Miter Saw base.
You should record both model and serial number in a
safe place for future use.
QUESTIONS OR COMMENTS?
CALL 1-800-4-RIDGID
www.ridgidwoodworking.com
Please have your Model Number and Serial Number on hand
when calling.
Form No. SP6287-1
Serial No. ______________
RIDGID Power Tools
Emerson Electric Co.
Printed in Taiwan 12/00