Netopia 3387W-ENT Getting Started Manual page 27

The following steps will get you up and running quickly:
1. Open a Telnet session to 192.168.1.1 to bring up the Main Menu.
If you don't know how to do this, see
The Main Menu appears.
If you do not see the Main Menu, verify that:
• The computer used to view the Telnet screen has an Ethernet connection to the Netopia 3387W-ENT's
Ethernet port. See
•
Telnet is configured for the recommended values.
•
You have entered the correct password, if necessary. Your Netopia 3387W-ENT's Telnet access may be
password protected from a previous configuration. See your system administrator to obtain the password.
See the Firmware User's Guide chapter on "Troubleshooting" for more suggestions.
2. Select the first item on the Main Menu list, Easy Setup. Press Return to bring up the WAN Ethernet
Configuration menu screen.
"Connecting through a Telnet Session" on page
Netopia 3387W-ENT
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
"Connecting through a Telnet Session" on page
5-2.
5-2.
Easy Setup 6-3