Table of Contents
Advertisement
Micro 3000 Control Station User Instructions
View and Reset After Hours Time
Adjust After Hours Timer
ON
START STOP
kWh
ON
START
OFF DAY
SET
MONTH
OFF DAY
ppm
%
Rh
ppm
At the After Hours
Press
menu.
Press
.
After Hours range is MAN to 24:00 hours (0.5 hour increments).
When MAN is set, the controller operates in Manual On/Off mode.
If using Manual On/Off mode, disable the schedules by
pressing and holding the left button from the default screen.
After Hours default is 2 hours.
ON
START STOP
kW
OFF DAY
SET
MONTH
ppm
%
Rh
After Hours
Manual On/Off
setting screen
MAN is the default setting for the M3K01 & M3K03 non-timeclock
models.
Innotech Support
Innotech provides technical information on the Web to assist you with using its products.
At www.innotech.com.au, you can find technical manuals, user instructions, and data sheets for all our
products.
For direct product support or product information, contact your local distributor, or an Innotech
representative.
You can contact us via email, fax, or postal mail:
Website:
www.innotech.com.au
Email:
sales@innotech.com.au
Fax:
+61 7 3421 9101
Mail:
Innotech Control Systems
P.O. Box 292
Sunnybank
QLD 4109
Australia
Edition 1.3 dated 19.11.2013
kWh
ON START
kWh
SET
MONTH
OFF DAY
MONTH
%
Rh
ppm
%
Rh
Adjust using
.
half hour increments.
Press
when
to Exit.
finished.
Reset Accumulated After Hours Run Time
ON
START STOP
kWh
OFF DAY
SET
MONTH
ppm
%
Rh
At the After Hours
menu.
in
Press
.
Not displayed
if Accumulated
Run Time is zero
Each press of the After Hours button
(Power Button) at the default screen
will add 0.5 hours to the Accumulated
After Hours Total.
Page 8
ON
START STOP
kW
ON
START STOP
OFF DAY
SET
MONTH
OFF DAY
ppm
%
Rh
ppm
Press
to select
Press and hold
Run Time. Press
to reset hours.
to view After
Hours Run Time.
ON
START STOP
OFF DAY
ppm
After reset, Press
to Exit.
© Mass Electronics Pty Ltd 2013
kWh
SET
MONTH
%
Rh
kWh
SET
MONTH
%
Rh
Hide quick links:
Advertisement
Table of Contents
