Control Station Interface - Innotech Micro 3000 User Instructions

Micro 3000 Control Station User Instructions

Control Station Interface

The buttons and features of the Control Station interface are shown below in Figure 2.
ON
1
Figure 2: Control Station Interface
M3K Control Station Operational Basics
Table 2:
Function
Run Request / After
Hours
Adjust Set Point
Temperature
Adjust Fan Speed
Enable / Disable
Programmed
Schedules
2
Set Control Mode
View Current Status
Navigate Menus
Startup Defaults
When After Hours is disabled (set to ----), the Power
On/Off button is disabled.
Edition 1.3 dated 19.11.2013
Schedule Indicator
Primary Display
Secondary Display
Left Button
Right Button
Centre Button
Up Button
Down Button
Power ON/OFF
Procedure
Press the POWER button to cycle ON or OFF.
Press the UP button to increase the set point, or DOWN button to decrease the set point.
Press the LEFT button to adjust the fan speed to the desired setting.
1
Hold down the LEFT button to enable or disable programmed schedules. When pro-
grammed and enabled, Yearly Schedules have priority over Weekly Schedules.
Press the RIGHT button to cycle through the Automatic, Heating, Cooling & Fan Only
control modes.
Press the CENTRE button to scroll through various information on the display. The
display will show Time
Temperature and Analogue Output Value. The display will return to the default screen
after 30 seconds.
Use the LEFT, RIGHT and CENTRE buttons to navigate the menus.
Hold the CENTRE and RIGHT buttons to Set Default Start-up Values. The current settings
are saved and the settings will be retained in case of power loss.
Control Station Buttons and Functions
Table 1:
Button
Power ON/OFF -
Up and Down -
Left Button
Centre Button -
Right Button -
2 , Date 2 , Control State, Set Point, Room Temperature, Ambient
Page 5
Description
Press the POWER ON/OFF button to
turn the system on or off.
When adjusting a setting, use the UP
button to increase the value, or the
DOWN button to decrease the value.
Use the LEFT Button to exit and
return to the previous menu. Press
repeatedly to return to the main
menu. This button also adjusts the
fan speed and enables and disables
schedules.
The CENTRE Button has several
functions: Enter / Save / Copy / De-
lete. These functions are available
depending on which menu you are
in, or what you are adjusting.
Use the RIGHT button to scroll
through the different screens and
settings.
1 2 M3K02 & M3K04
M3K03 & M3K04
models only
models only
© Mass Electronics Pty Ltd 2013