Led Description - Netopia Network Adapater User Manual

2.2 LED description

Fig 2-2 shows the LED indicators of the VOIP ATA.
LED STATUS
PWR
ETH
Blinking
Off
PHONE
Blinking
Off
Figure 2-2 : LED Indicators
On The VOIP ATA is receiving power.
On The VOIP ATA has an Ethernet connection with cable/DSL
modem.
The VOIP ATA is sending/receiving dVoIP ATA to/from
the cable/DSL modem.
The VOIP ATA doesn't have an Ethernet connection with
the cable/DSL modem.
On This port(s) is registered to the Internet Phone Service
Provider(s).
The telephone(s) connected to this port(s) is(are) off-hooked.
This port(s) isn't registered to the Internet Phone Service
Provider(s).
Table 2-2 : LED Descriptions
User Guide
DESCRIPTIONS
User Guide 2-9