Chapter 6 - Basic Configurations; Wan Configuration - Netopia Network Adapater User Manual

Chapter 6 - Basic Configurations

6.1 WAN Configuration

This page let you configure the WAN settings.
Static IP Settings:
IP Address:
Range for IP Address is x.x.x.y, where 0 ≤ x≤ 255 and 1 ≤ y≤ 254, default is
192.168.241.101.
Subnet Mask:
Range for Subnet Mask is x.x.x.x, where 0 ≤ x≤ 255, default is 255.255.255.0
Gateway:
Range for Gateway is x.x.x.y, where 0 ≤ x≤ 255 and 1 ≤ y≤ 254, default is 0.0.0.0.
DHCP Clients:
DHCP Client:
This is to enable or disable the VOIP ATA WAN as a DHCP client. DHCP Client is
generally used in the following encapsulations: 1483 Bridged IP LLC, 1483 Routed IP
LLC, 1483 Bridged IP VC-MUX, 1483 Routed IP VC-Mux, and Classical IP over ATM.
This option is for non-static (dynamic) IP addresses.
Host Name:
The Host Name can be up to 19 characters.
User Guide
Figure 6-1 WAN Configuration
User Guide 6-23