Gira 1010 00 Installation Instructions

Weather station
GIRA
Info
Installation Instructions
Weather station
System information
This device is a product of the Instabus-KNX/EIB sys-
tem and complies with KNX directives.
Detailed technical knowledge obtained in Instabus
training courses is a prerequisite to proper under-
standing.
The functionality of this device depends upon the soft-
ware.
Detailed information on loadable software and attain-
able functionality as well as the software itself can be
obtained from the manufacturer's product database.
Planning, installation and commissioning of the unit is
effected by means of KNX-certified software.
An updated version of the product database and the
technical descriptions are available in the Internet at
www.gira.de.
Function
• The weather station serves to collect and to trans-
mit weather data and events. Up to four analog
transducers as well as a digital combination sensor
(order no. 1025 00, measuring wind intensity,
brightness and rain; with DCF77 receiver) can be
connected.
• The weather station evaluates both voltage and
current signals:
Voltage signals: 0 ... 1 V DC
Current signals: 0 ... 20 mA DC
• The current inputs 4 ... 20 mA can be monitored for
wire breakage (parameter setting).
Weather station
Attention:
• Electrical equipment must be installed and fit-
ted by qualified electricians only and in strict
observance of the relevant accident preven-
tion regulations.
• Failure to observe any of the installation in-
structions may result in fire and other hazards.
• U
the corresponding terminals of another device
(risk of irreparable damage).
• The terminal block for the connection of the
combination sensor must be plugged on be-
fore the mains voltage is switched on and dur-
ing operation to prevent the digital input from
unintentional contact with live wires. This
would endanger the safety of the entire sys-
tem.
As a result, the device and any connected sen-
sors may be irreparably damaged.
0 ... 10 V DC
4 ... 20 mA DC
9/06
Safety instructions
and GND must not be interconnected with
S
Order no.: 1010 00
Page 1 of 4