DISMANTLING INSTRUCTIONS
Dismantling of the Cassette Cover
2. Twist screw driver
3. Lift up and out
1. Place screw driver
(flat side) between
the cassette cover
& cassette door
Remove Cassette Cover
Dismantling of the CDC Module and Front Panel
1) Loosen 4 screws to remove the Cover Top (pos 255) of the
set.
2) Loosen 2 screws to remove the Panel Left (pos 253) and
2 screws to remove the Panel Right (pos 254) of the set.
3) Slide out the CDC Tray as shown in the diagram below with
the help of a flat head screw driver.
3-1
Cassette Cover
Sliding out the CDC Tray
Dismantling of the CDC Module and Front Panel
4) Remove the Cover Tray CDC (pos 106) as indicated.
5) Loosen 2 screws A and 2 screws B to remove the CDC
Module (pos 1105) as indicated.
6) Remove 2 screws (pos 226) at the bottom to separate the
Front Panel Assembly from the Plate Bottom (pos 265).
3-1
Remove Cover Tray CDC
Front View CDC
Remove CDC Module