6. Multimedia
You can watch the videos and view the photos taken by the DVR.
You need to connect your DVR to the TV to watch the videos and view
the photos.
Connect to your TV
Your DVR's HDMI cable lets you watch the videos and view photos on your TV.
1. Connect your DVR to the TV by using the supplied HDMI cable.
2. Switch your TV to HDMI mode.
3. Slide the switcher to [
4. While connecting to your TV, use the following buttons to control playback:
- Press [M] to switch among MOVIE, PHOTO, REC and SETUP modes.
- Slide the switcher to [
- Press [R] to make a selection.
Watch a video
1. After connecting to your TV, press [M] to switch to MOVIE preview.
2. Use the [R] button to choose your desired video.
3. Slide the switcher to [
4. Slide and release the switcher to pause or resume playing.
5. Press [M] to exit.
View your photos
1. After connecting to your TV, press [M] to switch to PHOTO preview.
2. Use the [R] button to choose your desired photo.
3. Slide the switcher to [
4. Press [M] to exit.
] to power on your DVR. Your DVR is in preview mode now.
] and release it to confirm.
] and release it to start playing the video.
] and release it to toggle among photos.
USER MANUAL
RoadRunner PCDVRR710X
6
9