Troubleshooting; Burner And Nozzle Specifications - Ariston CP 857 GT Instructions For Use And Installation

It may occur that the appliance does not function or does
not function properly. Before calling customer services for
assistance, let's see what can be done.
First of all, check to see that there are no interruptions in
the gas and electrical supplies, and, in particular, that the
gas valves for the mains are open.
The burner does not light or the flame is not uniform
around the burner.
Check to make sure that:
• The gas holes on the burner are not clogged;
• All the removable parts that make up the burner are
mounted correctly;
• There are no draughts around the cooking surface.
The flame does not stay on
Check to make sure that:
• You press the knob all the way in;
• You keep the knob pressed in long enough to activate
the safety device.
• The gas holes are not clogged in the area corresponding
to the safety device.
Table 1
BURNER
C.Rapid
B. Semi-rapid
A. Auxiliary
D. Triple Ring
I. Double flame DC DR (internal)
I. Double Flame DC DR (external)
Gas Oven
Supply pressure
* At 15°C and 1013 mbar-dry gas
Propane G31 H.s. = 50,37 MJ/kg
Butane G30 H.s. = 49,47 MJ/kg
H.s. = 37,78 MJ/m 3
Methane G20
This appliance conforms to the following European Economic
Community directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifi-
cations;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and
subsequent modifications;
- 90/336/EEC of 29/06/90 (Gas) and subsequent modifications;
- 93/68/EEC of 22/07/93 and subsequent modifications.

TROUBLESHOOTING

BURNER AND NOZZLE SPECIFICATIONS

Diameter Thermal power
(mm) kW (H.s.*)
Nomin. Reduc.
100 3.00
75 1.65
55 1.00
130 3.25
30 0.90
130 4.10
4.00
The burner does not remain on when set to "Low".
Check to make sure that:
• The gas holes are not clogged.
• There are no draughts near the cooking surface.
• The minimum has been adjusted correctly (see the
section entitled, "Adjusting the low flame").
The cookware is not stable.
Check to make sure that:
• The bottom of the cookware is perfectly flat.
• The cookware is centered correctly on the burner.
If, despite all these checks, the appliance does not function
properly and the problem persists, call the nearest Indesit
Company Customer Service Centre, informing them of:
- The type of problem.
- The abbreviation used to identify the model (Mod. ...) as
indicated on the warranty.
Never call on technicians not authorised by the
manufacturer, and always refuse to accept spare parts that
are not original.
Liquid gas
By-pass Injector
1/100 1/100
(mm) (mm)
0.7 40 86
0.4 30 64
0.3 27 50
1.3 57 91
0.4 30 44
1.3 57 70
0.8 45 95
Nominal
Minimum
Maximum
OVEN TECHNICAL SPECIFICATIONS
ENERGY LABEL
Directive 2002/40/EC on the label of electric ovens
Norm EN 50304
Energy consumption for Natural convection:
Declared energy consumption for Forced
convection Class:
12
Natural gas
Flow * Injector
g/h 1/100
G30 G31 (mm)
218 214 116
120 118 96
73 71 71
236 232 124
65 64 72
298 293 110
291 286 142
28-30 37
20 25
35 45
heating mode: Convection
heating mode: Fan assisted
Flow*
l/h
G20
286
157
95
309
86
390
381
20
17
25