Omron BP761CANN Instruction Manual page 24

3. Using the Device
TO DELETE ALL RESULTS AND SETTINGS
To delete all the information stored in your monitor, follow the instructions below. Make sure that the
monitor's power has been off.
1.
While holding the
press the START/STOP button for
more than 5 seconds.
2.
Release the
button when "CLr" appears on the display.
The "CLr" will appear on the display when your monitor has been
initial setting.
3.
Press the START/STOP button to turn the monitor off.
The monitor will automatically turn off after 10 seconds even forgetting the off the
monitor.
Note:
• Initial setting of the monitor will not delete the information in the app.
• The monitor will automatically turn off after 2 minutes.
20
button down,
button and START/STOP