NETGEAR FS526T FS526T FS526T User Manual page 45

This appendix provides default settings for the NETGEAR Smart Switches. You can always
configure the switch to default settings by using the Factory Reset function from a Web browser.
Table A-1. Default Settings
FEATURE
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
Default Settings
DEFAULT SETTING
Auto-negotiation
Auto-negotiation
Enabled
Enabled
DHCP enabled
password
Port-Based VLAN
Disabled
Optimized for flow control, all ports set normal priority
July 2005
Appendix A
Default Settings
A-1