Isp Instructions - Philips 26MF605W/17 Service Manual

30
26MF605W/17
Go to cover page
Configuration and procedure
"Easywriter " The software is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 106 10396) is for the interface between
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
3. ISP Software " Easywriter "
4. DDC2BI_ISP TOOL (3138 106 10396)
Parallel Port to Print Port in PC
5. Connect DDC2BI_ISP TOOL
in Fig. 2.
Monitor (A)
Connect to
Mains cord
Video cable
Fig.2
6. Install and setup the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\ 26MF605W-17
Step 2 : Copy ISP Software Easywriter into your folder
as shown in Fig.3.
170S5
Fig. 3

ISP Instructions

as shown in Fig. 1
D-SUB to monitor
Fig. 1
and Mains cord to Monitor as shown
PC
26MF605W-17 -Monitor (B)
D-Sub
Connect to Mains
cord at this moment.
ISP box
Step 3 :Copy the FL1_NAFTA_26_V120_3A10.hex to C:\26MF605W-17
as shown in Fig. 4 .
Lenovo CK5S5
Fig.4
Update the firmware
1. Double click the Easywriter.exe icon in desktop then appears
window as shown in Fig.6 .
Fig. 5
Fig. 6