Mechanical Instruction - Philips 26MF605W/17 Service Manual

12 26MF605W/17
Go to cover page
Front view
Back view
Step 1. Remove the stand.
Remove the three screws as Fig.3 and Fig.4
Fig.3
Step 2. Remove the Back cover as Fig.5~8.
a. Remove the seven screws on the sides and the other
two screws as Fig.5
b. Use thin "I" type screwdriver to open 4 clicks on bottom
side as Fig.6
c . Use thin "I" type screwdriver to open 3 clicks on right
side as Fig.7
e. Use thin "I" type screwdriver to open 3 clicks on left
side as Fig.8
f. Use thin "I" type screwdriver to open 4 clicks on top
side as Fig.9
g. Remove the back cover as Fig.10 ,then remove the
10 screws as Fig.10,Fig.11,Fig.12
Fig.5

Mechanical Instruction

Fig.1
Fig.2
Fig.4
Fig.6
Fig.9
Step 3. Remove the Scaler and Power board.
Remove the 19 screws and disconnect the 9 cables as Fig. 13
and Fig.14
Fig.7
Fig.8
Fig. 10
Fig. 11
Fig. 12