Epson SureColor S40600 User Manual page 71

Setting
Heating & Drying
Media Tension
Media Suction
Head Movement
Option
Heater Temperature
Drying Time Per Pass
After Heater Feed
Additional Dryer
Lv1
Lv2
Lv3
Lv4
1 to 10
Data Width
Printer Full Width
71
Description
Adjusts the temperature for the pre-
heater/platen heater and after heater.
Adjusts the time the print head pauses
after each pass. Increase the drying
time if the your printouts are blurry.
Feeds media to the after heater after
printing. Select Mode 1 if you plan to
cut the media before the next job starts;
the portion fed for drying will not be
rewound before the next job starts.
Select Mode 2 if you plan to print
multiple jobs consecutively; the portion
fed for drying will be rewound before
the next jobs starts.
Note: When cutting media using Mode
2, press and hold the up arrow button to
rewind the end of your printout to the
cutter grove before cutting.
Enable or disable the print drying
system if it is installed.
Increase the media tension if creases
appear in your printouts.
Reduce the media suction if you are
using thin or soft media and it feeds
incorrectly, or your printouts are grainy
or out of focus.
Sets the range of print head movement.
Select Data Width to increase the print
speed by restricting movement to the
printed area. Select Printer Full Width
if you want more even print results.