1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. SG1250
  6. Instruction manual

Makita SG1250 Instruction Manual

Hide thumbs Also See for SG1250:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Wall Chaser
SG1250
004495
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita SG1250

Summary of Contents for Makita SG1250

  • Page 1 INSTRUCTION MANUAL Wall Chaser SG1250 004495 DOUBLE INSULATION IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model SG1250 Wheel diameter 125 mm Max. wheel thickness 2.1 mm European countries 10,000 (min Rated speed (n) / No load speed (n Other countries 9,000 (min Spindle thread Overall length 346 mm Net weight 4.4 kg Safety class •...

  • Page 3: General Power Tool Safety Warnings

    (grounded) power Makita Corporation responsible tools. Unmodified plugs and matching outlets will manufacturer declare that the following Makita reduce risk of electric shock. machine(s): Avoid body contact with earthed or grounded Designation of Machine: surfaces such as pipes, radiators, ranges and Wall Chaser refrigerators.

  • Page 4: Wall Chaser Safety Warnings

    GEB112-4 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves WALL CHASER SAFETY away from moving parts. Loose clothes, WARNINGS jewellery or long hair can be caught in moving parts. The guard provided with the tool must be 17.
  • Page 5 10. Wear personal protective equipment. into the pinch point can dig into the surface of the Depending on application, use face shield, material causing the wheel to climb out or kick out. The safety goggles safety glasses. wheel may either jump toward or away from the operator, appropriate, wear dust...

  • Page 6: Functional Description

    their own weight. Supports must be placed under FUNCTIONAL DESCRIPTION the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel. j) Use extra caution when making a “pocket CAUTION: cut” into existing walls or other blind areas. Always be sure that the tool is switched off and •...

  • Page 7: Electronic Function

    Loosen and remove the bolt with the hex wrench. Switch action Open the cover while holding the tool base with a hand as shown in the figure. 1. Slide switch 1. Blade case 2. Base 004499 CAUTION: 004501 Before plugging in the tool, always check to see that the •...

  • Page 8: Front Handle

    Adjusting the groove width (the distance between To install the diamond wheel, mount it carefully onto the the two diamond wheels) spindle, making sure that the direction of the arrow on The width of grooving in the workpiece can be adjusted the surface of the diamond wheel matches the direction by changing the number of the space rings as shown in of the arrow on the tool.

  • Page 9: Operation

    Then turn the tool on and wait until the wheel attains full Makita Authorized Service Centers, always using Makita speed. replacement parts.

  • Page 10: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Diamond wheels • NOTE: Some items in the list may be included in the tool •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884514E221...

Table of Contents