NETGEAR WIRELESS-G ROUTER WGR614V10 Reference Manual page 89

Table 6-1. Wireless Router Status Fields (continued)
Field
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Using Network Monitoring Tools
Wireless-G Router WGR614v10 Reference Manual
Description
These settings apply to the Ethernet (LAN) port of the router.
The Media Access Control address. This is the unique physical
address being used by the LAN port of the router.
The IP address being used by the Ethernet (LAN) port of the router.
The default is 192.168.1.1.
Identifies whether the router's built-in DHCP server is active for the
LAN-attached devices.
The IP subnet mask being used by the Ethernet (LAN) port of the
router. The default is 255.255.255.0.
These settings apply to the wireless port of the router.
The wireless network name (SSID) being used by the wireless port of
the router. The default is NETGEAR.
The geographic region where the router is being used. It might be
illegal to use the wireless features of the router in some parts of the
world.
Identifies the channel of the wireless port being used. Click the link to
the online document "Wireless Networking Basics" in Appendix B
the frequencies used on each channel.
Indicates the wireless communication mode: b and g; g only.
Indicates whether the radio feature of the router is enabled. If not
enabled, the Wireless LED on the front panel is off.
Indicates whether the router is broadcasting its SSID.
v1.0, February 2010
for
6-3