Setting Up And Testing Basic Wireless Connectivity - NETGEAR WIRELESS-G ROUTER WGR614V10 Reference Manual

• Idle Timeout. Your Internet connection is logged out if there is no data transfer during the
specified time interval.
• Domain Name Server (DNS) Address. If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select Use These DNS Servers, and enter
the IP address of your ISP's primary DNS server. If a secondary DNS server address is
available, enter it also.
Note: If you enter or change a DNS address, restart the computers on your

Setting Up and Testing Basic Wireless Connectivity

Follow these instructions to set up and test basic wireless connectivity. Once you have established
basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Select Wireless Settings under Setup in the main menu of the WGR614v10 router.
Figure 1-9
Configuring Basic Connectivity
network so that these settings take effect.
v1.0, February 2010
Wireless-G Router WGR614v10 Reference Manual
1-11