Blocking Services By Ip Address Range; Scheduling Blocking - NETGEAR WIRELESS-G ROUTER WGR614V10 Reference Manual

• If you know that the application uses either TCP or UDP, select the appropriate protocol. If
you are not sure, select Both.

Blocking Services by IP Address Range

In the Filter Services For area, you can block the specified service for a single computer, a range of
computers (having consecutive IP addresses), or all computers on your network.

Scheduling Blocking

The Wireless-G Router allows you to specify when blocking is enforced.
To schedule blocking:
1. Select Schedule under Content Filtering in the main menu. The Schedule screen displays.
Figure 3-4
2. Configure the schedule for blocking keywords and services.
a. Days to Block. Select days on which you want to apply blocking by selecting the
appropriate check boxes. Select Every Day to select the check boxes for all days. Click
Apply.
Restricting Access From Your Network
Wireless-G Router WGR614v10 Reference Manual
v1.0, February 2010
3-5