Table of Contents
Advertisement
QQ
3.1.10 Removing the mechanism board
3 7 63 1515 0
(See Fig.10)
• Remove the front panel assembly, heat sink, rear bracket, bot-
tom chassis assembly and middle chassis assembly.
(1) From the inside of the top chassis assembly, disconnect
the card wire from the connector
board.
(2) Remove the five screws N attaching the mechanism board.
(3) Lift the mechanism board to remove the joint f and remove
the joint g in the direction of the arrow.
3.1.11 Removing the CD mechanism assembly
(See Fig.11)
• Remove the front panel assembly, heat sink, rear bracket, bot-
tom chassis assembly, middle chassis assembly and mecha-
nism board.
TE
L 13942296513
(1) From the inside of the top chassis assembly, remove the
three screws P attaching the CD mechanism assembly.
(2) Take out the CD mechanism assembly from the top chas-
sis.
Reference:
When attaching the CD mechanism assembly, set the projec-
tions h of the top chassis assembly in the holes of the CD
mechanism assembly.
www
.
http://www.xiaoyu163.com
CN601
on the mechanism
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
N
g
CN601
P
Q Q
3
6 7
1 3
1 5
Top chassis assembly
co
.
9 4
2 8
f
N
Top chassis assembly
Mechanism board
Fig.10
0 5
8
2 9
9 4
2 8
P
h
h
CD mechanism assembly
Fig.11
m
(No.MA220)1-11
9 9
N
9 9
Hide quick links:
Advertisement
Table of Contents
