Hitachi w43h User Manual page 91

Use j to select "OK," and
press c (選択)(Select).
The coverage areas and channels you can receive are
automatically set, TV broadcasting screen appears. If you
select "OK(以後確認しない)" (OK "No confirmation
hereafter"), the transmission confirmation screen will not
appear after the next time.
◎You may want to try again to select the channel settings (see step 5) due
to the early stage conditions for "1Seg" service (digital Terrestrial TV
broadcasting designed for cellphones or other portable terminals).
◎When you start EZ Television (1Seg), it may take longer to be able see
TV programs or the data acquired by data broadcasting programs (one
of the characteristics of digital broadcasting).
◎While the standby screen is displayed, you can also press b to start EZ
Television (1Seg).
◎When you use EZ Television (1Seg) after the first time, the last channel
you selected broadcasts on the screen. When you are unable to get a
signal or set appropriate coverage areas, make channel settings again.
■ Switching between earphone and speaker
1 While EZ Television (1Seg) is active, press & （機能） (Function).
2 Use a to select
3 Use j to select
4 Use j to select
Use s to select
& (設定)(Setting).
5 Press c (選択)(Select).
The initial setting is "スピーカー" (Speaker).
字幕／音声 Caption/Sound
" " (
(Sound Settings), and press c （選択） (Select).
音声設定
" "
音声出力先設定
(Sound Output Settings).
" "
スピーカー
(Speaker) or
" "
, and press c （選択） (Select).
)
イヤホン
(Earphone), and press
" "
89