Desktop Holder - Hitachi w43h User Manual

Connect the common AC adaptor 01 (option) to the

desktop holder.

Check the shape of the connectors to ensure they are aligned correctly before
you connect.
Trying to force a connection may damage the connectors.
Fold out the power plug of the common AC adaptor 01
(option), and then plug it into a 100V AC power outlet.
Insert the W43H into the desktop holder.
This will make the W43H charge LED indicator light red, and the battery level
icon to change according to the following pattern:
When charging is completed, the battery level icon will show
indicator will go out.
When charging the battery with your W43H in Viewfinder position, check the
battery level icon shown on the screen. If you set "Func in Charge" to "MEDIA
STAND," the screen keeps illuminating with the normal brightness.
To remove the W43H from the desktop holder, holding the holder by hand and
remove W43H.
※ You can connect the common AC adaptor 01 (option) to the W43H directly to charge
the battery pack.
➔ ➔ ➔
and the LED
Check the shape of the connector
ends to ensure they are aligned
correctly (shown above) when
connecting.
13