XL500S
2.4.2
The input voltage requirements are +5.0V ± 5% and +12.0V ± 10%.
2.4.3
Maximum
Frequency
2.4.4
SATA Connectors
For information on SATA data connectors, refer to the Serial ATA 1.0 specification available
for download at www.serialata.org.
At the time of this printing, there are no published standards for SATA power/mating
connectors or power/data cable wire gauges.
Cabling Requirements for SATA
The SATA cable consists of four conductors in two differential pairs. The cable may also
include drain wires to be terminated to the ground pins in the SATA cable receptacle
connectors. See the SATA 1.0 specification for cable specifications. The cable's maximum
length is one meter.
2679-701211-A06
Input Voltage Requirements
Ripple
+12 VDC
200 mV (double amplitude)
0-30 MHz
Power Connectors and Cables
RELEASED 10/21/10 (WD CONFIDENTIAL)
+5 VDC
100 mV (double amplitude)
0-30 MHz
Specifications
9