Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Figure 2-2: WG302 rear panel
•
Left and Right Detachable Antenna
The WG302 provides two detachable antenna.
•
Restore to Factory Defaults Button
The restore to default button located between the Ethernet RJ-45 connector and the power
socket restores the WG302 to the factory default settings.
•
Serial Console Port
Male DB-9 serial port for serial DTE connections.
•
RJ-45 Ethernet Port
Use the WG302 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as a
hub, switch, router, or POE switch.
•
Power Socket
This socket connects to the WG302 12V 1.2A power adapter.
2-8
September 2004
Introduction