FujiFilm FinePix S6000fd Service Manual page 109

FinePix S6000fd/S6500fd Service Manual
<Step 1>
Select [F12] End Setting on the [Adjustment Items Select] screen.
—> The [End Setting Description] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
End Setting
The End settings consist of the destination setting,
the USB_ID write, and product mode settings
(= Mass Storage recognition).
Press the [Enter] key.
—> The [Destination Setting] screen appears.
<Step 3>
Destination setting
The destination is selected from an undermentioned list,
according to third character from left side of the serial number.
<A> FinePix S6000fd J-model
<B> FinePix S6000fd US-model
<C> FinePix S6500fd EU/EG/EE/AS-model
<D> FinePix S6500fd EU/EG/EE/AS-model
* Japan production
<E> FinePix S6500fd CH-model
<Note>
This example assumes that <B>US-Model has been selected. The following screen therefore appears.
Note: If the destination is "EE" and the production location is given as "MADE IN JAPAN" on the serial label, "D" should be
selected.
—> The [US-Model selected] screen appears.
4. Adjustments
The third character
0 to 9
A to H,J,K
L to N,P to V
L to N,P to V
W to Z
<Fig. 4-19-1>
<Fig. 4-19-2>
4-47