F6] : Af Adjustment - FujiFilm FinePix S6000fd Service Manual

FinePix S6000fd/S6500fd Service Manual

4-12. [F6] : AF Adjustment

<Setup for AF Adjustment>
(1) Set the camera in the zoom drive jig.
(2) Set up the camera so that the distance from the multi-stripe chart to the front edge of the camera's filter ring is 897.3±1
mm.
(3) Illuminate the AF chart with a light source. Ensure that the brightness at the surface of the AF chart is between 8.0 to
10.0EV. (Check that the aperture is set to [F2.8] at the wide-angle zoom setting.)
(4) Set the conversion lens on the base.
Lens Holder
Lens Stand
Lens Base Plate
S9100/S9600 Multi-stripe chart
<Step 1>
Select [F6] AF Adjustment on the [Adjustment Items Select] screen.
—> The [AF Adjustment Preparation] screen appears.
Attention when conversion lens is used.
Convex side : Subject side.
Plane : Camera lens side.
Washer Fixed side
(Plastic)
4. Adjustments
Conversion lens
flat side
Filter ring edge
Fluorescent
light stand
800mm conversion lens
897.3mm±1mm 897.3mm±1mm
Zoom drive jig
S9100/S9600
Multi-stripe chart
803.3mm±1mm
Centerline
4-29