10. DISASSEMBLY INSTRUCTIONS
Be sure to unplug the machine before disassembling and repairing the parts.
CONTROL PANEL
DRAWER
CONTROL PANEL ASSEMBLY
CONTROL PANEL ASSEMBLY
TOP PLATE ASSEMBLY
DISPLAY
PWB ASSEMB LY
1 Unscrew 2 screws on the back of the top plate.
2 Pull the top plate backward and upward as
shown.
3 Disconnect the Display PWB assembly
connector from the cabling.
4 Pull out the drawer and unscrew 2 screws.
5 Remove one screw.
6 Lift the side the control panel assembly and
pull it out.
7 Unscrew the 8 screws from the control panel
assembly.
8 Disassemble the display PWB assembly.
46