Customizing Your Network Settings; Using The Lan Setup Options - NETGEAR RANGEMAX WNDR3300 User Manual

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
This chapter describes advanced features of the RangeMax Dual Band Wireless-N Router
WNDR3300. This chapter includes the following sections:
• "Using the LAN Setup Options
• "Configuring the WAN Setup Options
• "Using a Dynamic DNS Service" on page 5-5
• "Configuring Static Routes" on page 5-9
• "Allowing Inbound Connections to Your Network" on page 5-11
• "Configuring Port Forwarding to Local Servers" on page 5-16
• "Configuring Port Triggering" on page 5-18
• "Wireless Repeating (Also Called WDS)" on page 5-21

Using the LAN Setup Options

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The router's default LAN IP configuration is:
• LAN IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.

Customizing Your Network Settings

Customizing Your Network Settings
v1.1, October 2008
Chapter 5
5-1