NETGEAR RANGEMAX WNDR3300 User Manual page 118

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 User Manual
Table A-1. WNDR3300 Router Default Configuration Settings (continued)
Feature
Internet connection
MAC Address
MTU Size
Local network
Router LAN IP address printed on
product label (gateway IP address)
Router subnet
DHCP server
DHCP range
Time zone
Time zone Daylight Saving time
Allow a registrar to configure this router Enabled
Wireless
Wireless communication
SSID names
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Firewall
Inbound (communications coming in
from the Internet)
Outbound (communications going out
to the Internet)
*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network con-
ditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
A-2
Default Setting
Use default hardware address
1500
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
Disabled
Enabled
• 11N SSID: NETGEAR-DualBand-N
• 11G SSID: NETGEAR-2.4-G
Disabled
Enabled
Auto
*
United States in the US, otherwise varies by region
6 until region selected
• 802.11n 2.4G mode
• 802.11n 5G mode and 802.11g legacy mode at 2.4G
Best
Full
Disabled (bars all unsolicited requests)
Enabled (all)
Default Configuration and Technical Specifications
v1.1, October 2008