Configuring Static Routes - NETGEAR RangeMax Next Wireless Router WNR834M Reference Manual

NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the main menu of the browser interface, under Advanced, click on Static Routes to view the
Static Routes menu, shown below.
Figure 6-11
To add or edit a Static Route:
1. Click the Add button to open the Add/Edit Menu, shown below.
Figure 6-12
2. Type a route name for this static route in the Route Name box.
(This is for identification purposes only.)
6-18 Advanced Configuration of the Router
v1.3, May 2006