Viewing A List Of Attached Devices; Configuration File Management - NETGEAR RangeMax Next Wireless Router WNR834M Reference Manual

NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual
Table 5-3: Router Statistics Items (continued)
Item Description
Up Time The time elapsed since this port acquired the link.
Poll Interval Specifies the intervals at which the statistics are updated in this window.
Set Interval Enter a time and click the Set Interval button to set the polling frequency.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the main menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 5-4
For each device, the table shows the IP address, NetBIOS Host Name or Device Name (if
available), and Ethernet MAC address. To force the router to look for attached devices, click the
Refresh button.
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.

Configuration File Management

The configuration settings of the WNR834M router are stored within the router in a configuration
file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the user's PC, or
cleared to factory default settings.
Maintenance
v1.3, May 2006
5-5