NETGEAR MBR624GU User Manual page 78

3G Broadband Wireless Router MBR624GU User Manual
To view or change the WAN Setup:
1. From the main menu, select WAN Setup to display the WAN Setup screen:
Figure 5-1
2. Make the changes that you want, and then click Apply to save the settings.
The WAN Setup fields are described in the following table:
Table 5-1. WAN Setup Settings
Setting
Disable Port Scan and DOS
Protection
Default DMZ Server
Respond to Pin on Internet
WAN Port
MTU Size (in bytes)
5-2
Description
This check box is usually clear so that the firewall protects your LAN
against port scans and denial of service (DOS) attacks. This check box
should be selected only in special circumstances.
This feature is sometimes helpful when you are using some online
games and videoconferencing. Be careful when using this feature
because it makes the firewall security less effective. See
Default DMZ Server" on page
If you want the router to respond to a ping from the Internet, select this
check box. This should be used only as a diagnostic tool, since it allows
your router to be discovered. Do not select this check box unless you
have a specific reason to do so.
The normal MTU (Maximum Transmit Unit) value for most Ethernet
networks is 1500 bytes, or 1492 Bytes for PPPoE connections. For
some ISPs you might need to reduce the MTU. This is rarely required,
and should not be done unless you are sure it is necessary for your ISP
connection.
v1.0, January 2009
5-3.
Advanced Configuration
"Setting Up a