Driver & Application Installation - Leadtek winfast Quick Installation Manual

Driver & Application Installation
Step 1:
Power on your PC and start up Windows. You will see the
information shown on the screen a few times, followed by a dialog box titled
Hardware Wizard
Step 2:
Insert the software CD in your CD-ROM drive. The setup screen will then appear. Click
WinFast Entertainment Center
Step 3:
Select the language you use. And then click
Step 4:
The InstallShield Wizard starts to prepare for the installation. The progress is shown in
the dialog box.
Step 5:
The WinFast Entertainment Center 2in1 setup panel shows the welcome information.
Click Next to start the installation of the driver.
Step 6:
Another dialog box shows the setup status with a progress bar. Wait until the bar is filled.
Clicking Cancel will exit the setup.
Step 6-1:
If some warning messages appear, click
Step 7:
When the driver installation is completed, the complete dialog box appears asking if you
want to restart your computer. Click
DirectX has not been installed on your system, please follow the on-screen instructions
to install the new DirectX. The system will automatically reboot after the installation is
completed.)
Step 8:
After rebooting the computer, the
Select the language you use and then click
Step 9:
The InstallShield Wizard shows the welcome message of the application installation.
Click Next to start the installation of the application.
Step 10:
A license agreement appears on the screen. Click
. Click Cancel to dismiss this dialog box.
.
Choose Setup Language
OK.
Continue Anyway
Yes,...... and then
OK .
Yes
11
New Hardware Found
.
Finish . (If the latest version of
dialog box appears again.
to continue.
Add New