Hardware Installation - Leadtek winfast Quick Installation Manual

Hardware Installation

Step 1:
Power off your PC. Open the computer case. Remove the coverplate of an unused
expansion slot.
Step 2:
Align the bus on the card with the PCI slot.
Step 3:
Gently press the TV Card down into the slot until you feel the edge of the bus reaches
the bottom of the PCI slot. Note that the capture card can be inserted into PCI slot in
one direction only.
Step 4:
Secure the bracket of the card to your computer case with the screws. Then fit the
computer case cover back in place.
Step 5:
Connect the input sources and output devices to your capture card following the
instructions given in Board Layout in the previous section. Now you are ready to
connect the video sources to your capture card.
10