Selecting What Information To Log - NETGEAR FR328S Cable/DSL ProSafe Firewall FR328S FR328S Reference Manual

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Log entries are described in
Table 6-5: Security Log entry descriptions
Field Description
Date and Time The date and time the log entry was recorded.
Description or The type of event and what action was taken if any.
Action
Source IP The IP address of the initiating device for this log entry.
Source port and The service port number of the initiating device, and whether it
interface originated from the LAN or WAN
Destination The name or IP address of the destination device or website.
Destination port The service port number of the destination device, and whether
and interface it's on the LAN or WAN.
Log action buttons are described in
Table 6-6: Security Log action buttons
Field Description
Refresh Click this button to refresh the log screen.
Clear Log Click this button to clear the log entries.
Send Log Click this button to email the log immediately.
Apply Click this button to apply the current settings.
Cancel Click this button to clear the current settings.

Selecting What Information to Log

Besides the standard information listed above, you can choose to log additional information. Those
optional selections are as follows:
• All incoming and outgoing traffic
• Attempted access to blocked site
• Connections to the Web-based interface of this Router
6-6
Table 6-5
Table 6-6
M-10207-01, Reference Manual v2
Managing Your Network