Basic Requirements For Dial-In; How To Configure Dial-In - NETGEAR FR328S Cable/DSL ProSafe Firewall FR328S FR328S Reference Manual

Basic Requirements for Dial-in

Dial-in requires these elements:
A broadband connection to the FR328S.
1.
An analog phone line.
2.
A serial modem properly configured and attached to the DB9 connector on the serial port.
3.
The Dial-in settings configured and applied to the FR328S.
4.

How to Configure Dial-in

Follow the steps below to configure a serial port dial-in connection.
Configure a serial port modem according to the instructions above.
1.
From the Serial Port section of the main menu, click Dial-in.
2.
Figure 4-3: Serial Port Dial-in settings screen
Configure the Dial-in settings.
3.
Click Apply for the changes to take effect.
4.
Serial Port Configuration
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
M-10207-01, Reference Manual v2
4-5