Macos X - NETGEAR FR328S Cable/DSL ProSafe Firewall FR328S FR328S Reference Manual
Netgear firewall with dial back-up reference manual
Hide thumbs
Also See for FR328S Cable/DSL ProSafe Firewall FR328S FR328S:
- Quick installation manual (2 pages) ,
- Specifications (2 pages) ,
- Reference manual (131 pages)
Table of Contents
Advertisement
The TCP/IP Control Panel opens:
From the "Connect via" box, select your Macintosh's Ethernet interface.
2.
From the "Configure" box, select Using DHCP Server.
3.
You can leave the DHCP Client ID box empty.
Close the TCP/IP Control Panel.
4.
Repeat this for each Macintosh on your network.
5.
MacOS X
From the Apple menu, choose System Preferences, then Network.
1.
If not already selected, select Built-in Ethernet in the Configure list.
2.
If not already selected, Select Using DHCP in the TCP/IP tab.
3.
Click Save.
4.
Preparing Your Network
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
M-10207-01, Reference Manual v2
C-7
Advertisement
Table of Contents
Troubleshooting
