Table of Contents
Advertisement
Using "ImageDirector3" to Adjust the Picture
Quality
By using the "ImageDirector3," you can make the desired gamma correction from a
computer connected to the unit. Connect the REMOTE or LAN connector of the unit with
a computer and start-up "ImageDirector3" on the computer.
For details on how to use "ImageDirector3," refer to the Help in "ImageDirector3."
Notes
• You need to install the "ImageDirector3" on a computer beforehand. "ImageDirector3" can be
downloaded from the Sony website.
http://esupport.sony.com/US/p/select-system.pl
http://www.pro.sony.eu/pro/article/projectors-home-cinema-article
• When connecting the REMOTE or LAN connector with a computer, connect while the power of
the computer and the unit is off.
• You cannot adjust the picture quality when "Gamma Correction" in the Picture
"Off".
• When you set "Gamma Correction" in the Picture
"ImageDirector3" displays Gamma 1, Gamma 2, Gamma 3, Gamma 4, Gamma 5, or Gamma 6,
respectively.
• If you use "ImageDirector3" while a 3D video image is displayed or a 3D signal is input, the image
may be distorted.
30
menu to 1.8, 2.0, 2.1, 2.2, 2.4, or 2.6,
menu is set to
Advertisement
Table of Contents
