Message Types (Advanced) - Keith McMillen Instruments SoftStep Reference Manual

Nav S Trig Dbl
(Hosted mode only)
The same as the Dbl Trig source. Applies to the south key on the Nav Pad.
Nav S Trig Long
(Hosted mode only)
The same as the Long Trig source.

5.2 Message Types (Advanced)

Message Types select what kind of MIDI message the modline will output (there are also a couple of
other message types, but MIDI is the most common). The following message types are available in the
Advanced Editor:
None
No message will be output. Good for modlines that are only controlling LED behavior or being
further processed using one
Note Set
Outputs a MIDI note with a specified velocity. A positive value will send a note on message, a
value of 0 will send a note off message. The following options are available when Note Set is
selected:
Note
Sets the note number to be output.
Vel
Sets the velocity value to be output with the note on messages.
Ch
Sets the MIDI channel to output the note messages on.
Note Live
Outputs MIDI notes with a specified velocity. The note number is determined by the values coming
through the modline. The following options are available when Note Live is selected:
Vel
Sets the velocity value to be output with the note on messages.
Ch
Sets the MIDI channel to output the note messages on.
Applies to the south key on the Nav Pad.
of the Modline 1-6 Output sources.