Led+Display Settings - Keith McMillen Instruments SoftStep Reference Manual

4.2.3 LED+Display Settings

Hidden by default, the LED+Display Settings section can be accessed by clicking the LED+DISPLAY
SETTINGS button in the top-right corner of the key modulation window.
These settings are part of the modlines, and define how a SoftStep key's green and red LEDs behave,
and how the SoftStep display behaves when the key is pressed.
When displayed, the LED+Display Settings look like this:
LED+DISPL AY SETTINGS
(1) Show/Hide Switch
Shows and hides the LED+Display Settings section of the modulation window. The settings still
apply when hidden.
(2) Key Name
Sets the name of the key. Key names are used with the SoftStep's display in certain situations
(defined by the Display Mode option).
Note: Key names can also be
(3) Display Mode
Sets how the SoftStep's display should behave when the key is pressed. For a complete list of all
available display modes (and what they do), see the Display modes section of the Appendix.
1
edited in the key box area of the editor's main window.
2
Key Name
NINE
Green LED
Flash Fast False
Green LED
True
5
3
Display Mode Prefix
Immed Param
Red LED
None
Red LED
False
6
4
DT
7