Connection And Setup; Rear Panel; Connecting The Power Cord - SONIQ E42S14A Manual

Main Unit Control

Rear Panel

ETHERNET 1 2
2
1
9 10
No. Name
1 ETHERNET Connect it to the home network.
2 HDMI1/HDMI2 Connect the HDMI cable.
3 VGA Connect the PC VGA cable of your personal computer.
4
VGA AUDIO IN DVI or PC VGA audio input.
5 COMPONENT IN Connect the component video signal.
Connect the audio and video output of your AV equipment to the unit
6 R-L-VIDEO VIDEO 1 IN
using the AV cable included in the spare part.
7 ANT IN Connect to external antenna.
8 USB Connect USB device, such as USB disk, HID and so on.
9 AV IN Connect the audio and video output of your AV equipment to the unit.
10 SD/MMC
SD/MMC card reader slot.
11 AV/OUT Connect the audio and video input of your AV equipment to the unit.
Connect for media files playback and program recording.
12 USB 3.0
Not compatible with USB1.1.
13 USB
Connect for media files playback and program recording.
14 HDMI 3 Connect the HDMI signal.
DIGITAL AUDIO OUT
15 Connect the OPTICAL to the Audio Amplifier using an optical cable.
OPTICAL
11
Y Pb Pr R - L - VIDEO
VGA
VGA AV 1 IN ANT IN
AUDIO IN USB
3 4 5 6 7 8
11 12 13 14 15
Description

Connection and Setup

Connecting the Power Cord

Connect the power cord directly to the wall outlet.
The product must be operated only from the type of power sources indicated on the
marking lable (100-240V AC, 50Hz/60Hz.)
If the unit will not be used for a long period of time, it should be unplugged from the
wall outlet.
HDMl VGA/PC Connection
ETHERNET 1 2
12
Wall Outlet
Power Cord
Y Pb Pr R - L - VIDEO
VGA
VGA AV 1 IN ANT IN
AUDIO IN USB