Local Update; Program Edit; Auto Tuning - SONIQ E42S14A Manual

Smart TV Function
Manual Network update
HOME - > Settings - > System update or restore Factory - > System local update - >
Network Update to enter the interface of network update, then follow the steps of
auto network updating as above.

Local Update

1. Users need to download the related new
software from our official website.
2. Copy the software update to the USB device,
and named after update signed. zip
3. HOME - > Settings - > System update or restore Factory - > System Update - >
Local Update to enter the interface of local update, click on Update immediately
to start local update.
OSD Menu Operation (Before operating OSD menu, Please switch to full screen
playback by pressing HOME Button on the remote).
OSD menu can only be operated by using remote control.
Press MENU Button to enter the main menu, use Left and Right Button to select
CHANNEL.
OK Button
MENU
Button
HOME
Button
FN Button and Left, Right, Up or Down Buttons
as the same time.

Auto Tuning

1. Auto Tuning will be highlighted upon displaying this menu. Press OK Button to enter.
2. Press / to select country, press OK Button to enter the next step.
3. Use / button to select your location, then press OK button to enter the next step.
4. Press Up and Down to select tuning type. Press OK to start auto search.
OK Button
Australia
Confirm Return
31
Confirm Return
Smart TV Function
ATV Manual Tuning
FN Button and Left, Right, Up or Down Buttons
as be at the same time.
Press Up and Down Button to highlight ATV Manual Tuning, then press OK to enter
sub-menu.
1. Analog Scan : Press "OK" and then adjust Analog Scan by pressing Left and Right
Button.
2. Sound System : Press Left and Right Button to change (left/right/up/down) it into DK
or BG mode.
3. Search : Press Left and Right Button to set the Frequency and stop it by pressing OK,
Left and Right Button.
4. Frequency : Display the adjusted frequency channel.
5. Fine Tune : Press Left or Right Button to make minor modulation and stop it by pr
essing OK, Left and Right Button.

Program Edit

Press Up and Down to select Channel Edit, then press OK Button to enter sub-menu.
1. Press Green Button to rename the current channel. (only available in ATV)
2. Press Yellow Button to change the program order.
Selected channel can be moved by using Up and Down, then press OK for confirm.
3. Press Blue Button to skip the selected channel.
4. Press Red Button to delete the selected channel.
Red Button
Blue Button Green Button
Yellow Button
32
Program Edit
901 C-00
ATV
Delete Rename Move Skip
Select Confirm Return Exit
OK