SONIQ E42S14A Manual page 12

Smart TV Function
Wi-Fi Hotspot
HOME - > Settings - > Network and location settings - > Wi-Fi hotspot
First, assure TV is connected to wired network. Then to get mobile phone or notebook
connected to TV. Specific operations are as follows:
1. Make sure the Wi-Fi hotspot on TV is enabled.
2. Select settings to input the SSID and password. Choose Save to complete the
settings.
3. Use mobile phone and notebook to search TV Wi-Fi hotspot, and then input the
password.
Connection has been completed.
ALL Apps
Press the NAVIGATION Buttons to scroll to the ALL Apps and press OK, from the
displayed window you can operate any of the downloaded apps.
Application Management
Please insert the SD card before applying this function.
Apps Installation:
Install the apps that you want from the on-line shop.
1. The procedure for registration on cinavision are as follows:
1.1 Click on the login at the top of the HOME page.
1.2 Select register and obey the clause.
1.3 Input the user name, e-mail and password, then confirm the password.
1.4 Registration completed after being confirmed.
23
Note: Should you change the password, the
modified password should contain at
least 8 characters.
Smart TV Function
2. Click on the Login at the top of the HOME page, input e-mail and password to log in
to visit the on-line shop.
On-line apps can be downloaded through
HOME - > Market - > Apps
2.1 Choose the application that you need from the list.
2.2 Check the related information about the application, select install.
2.3 The installed application will display at interface of ALL Apps, click one of them
for running.
2.4 If there is not enough space on the
TV you can download the application
into the SD card for running.
Application Uninstall / Move
1. Find the application that you want to uninstall or move through the method of
HOME - > Settings - > Application management - >All applications
System provided application
can not be uninstalled.
2. Open the application, then
select Uninstall / Move.
Environment Selection
Initial setup window will appear when you first start to use , choose the setting mode
you want.
You can either choose to select HOME USE or DEMO.
HOME USE: To use this TV at home without demonstrating any advertisements.
DEMO: To use this TV for in-stone demonstration with digital adverts. (Please do not
select this mode when using at home.)
Users can switch between these two modes by
following the below method. Press HOME
Button to enter the HOME menu, click on Settings
will pop up to System settings, go to
Environment selection from the displayed window,
you can cycle through the two different
mode by pressing Up and Down Button, then press
OK Button to confirm.
24
To use this TV for in-
store demonstration,
select (Demo).