Sample Rate Display; Factory Default Settings - Extech Instruments RH520A User Manual

SAMPLE RATE DISPLAY
1. Press the VIEW and the TIME buttons simultaneously from the Standard View mode
2. Both numerical displays will switch off so that the LCD can show only the sample rate in
minutes (the MIN display icon will switch on)
3. The projected TIME‐DAYS that the internal memory will be full (based on the current sample
rate) is displayed in the TIME and DATE display areas
4. To change the sample rate, refer to the programming section of this manual.
5. Press the VIEW button to return to the Standard View
12 Hrs 38 minutes 10 months 28 days 3 years
Factory Default Settings
 Default LCD mode: Standard View
 Temperature Graph Vertical Resolution: ‐20 to 40
 RH Graph Vertical Resolution: 0 to 100%
 TEMP and RH Alarm Limits: 0 (low) and 100 (high)
 Sample Rate: One (1) reading stored per minute
actoolsupply.com
Sample rate
in minutes
MINUTES
indicator
Displays how
long it will take
to finish recording
in hours:minutes
months/days/years.
Not the actual date.
o
C
14
actoolsupply.com
RH520A-EU-EN v4.4 8/13